大家好,
我需要在Saber板上运行X服务器,使用默认的LVDS显示器。
我尝试安装xserver和mesa驱动程序,但是当我尝试启动xsever时,我有以下消息:
X.Org X Server 1.18.4
发布日期:2016-07-19
X协议版本11,修订版0
构建操作系统:Linux 4.4.0-45-通用ARMv7l Ubuntu
当前操作系统:Linux arm 4.9.27-armv7-rt-x4#1 SMP PREEMPT RT Thu May 11 13:52:44 CEST 2017 armv7l
内核命令行:console = ttymxc0,115200 root = PARTUUID = 9d49bce0-01 ro rootfstype = ext4 rootwait
建造日期:2016年11月2日10:05:15 PM
xorg-server 2:1.18.4-0ubuntu0.2
当前版本的pixman:0.33.6
在报告问题之前,请查看http://wiki.x.org
确保您拥有最新版本。
标记:( - )探测,(**)来自配置文件,(==)默认设置,
(++)来自命令行,(!!)通知,(II)信息,
(WW)警告,(EE)错误,(NI)未实施,(??)未知。
(==)日志文件:“/ var / log / Xorg.0.log”,时间:5月12日星期五17:02:59
(==)使用系统配置目录“/usr/share/X11/xorg.conf.d”
MESA-LOADER:设备不在PCI总线上
MESA-LOADER:设备不在PCI总线上
MESA-LOADER:设备不在PCI总线上
需要OpenGL 2.1或更高版本。
(EE)
致命的服务器错误:
驱动程序0的(EE)AddScreen / ScreenInit失败
(EE)
(EE)
请参阅The X.Org Foundation支持
在http://wiki.x.org
求助。
(EE)另请参阅“/var/log/Xorg.0.log”中的日志文件以获取更多信息。
(EE)
(EE)服务器因错误(1)。
关闭日志文件。
有人试过运行xserver吗?
顺便说一下,我正在使用内核4.10
问候,
Jeanluc
以上来自于谷歌翻译以下为原文
Hi all,
I need to run X server on Sabre board, using default LVDS display.
I tried to install xserver and mesa driver, but when I try to start xsever I have following messages:
X.Org X Server 1.18.4
Release Date: 2016-07-19
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.4.0-45-generic armv7l Ubuntu
Current Operating System: Linux arm 4.9.27-armv7-rt-x4 #1 SMP PREEMPT RT Thu May 11 13:52:44 CEST 2017 armv7l
Kernel command line: console=ttymxc0,115200 root=PARTUUID=9d49bce0-01 ro rootfstype=ext4 rootwait
Build Date: 02 November 2016 10:05:15PM
xorg-server 2:1.18.4-0ubuntu0.2
Current version of pixman: 0.33.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (–) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/Xorg.0.log”, Time: Fri May 12 17:02:59 2017
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
MESA-LOADER: device is not located on the PCI bus
MESA-LOADER: device is not located on the PCI bus
MESA-LOADER: device is not located on the PCI bus
Require OpenGL version 2.1 or later.
(EE)
Fatal server error:
(EE) AddScreen/ScreenInit faiLED for driver 0
(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at “/var/log/Xorg.0.log” for additional information.
(EE)
(EE) Server terminated with error (1). Closing log file.
Does anybody tried to run xserver?
By the way, I’m using kernel 4.10
Regards,
Jeanluc
0