1&＃xff0c; 增加端口配置模板

&＃xff08;1&＃xff09;需要子接口的端口配置
set interfaces fe-2/0/1 vlan-tagging              ――――在配置接口启用封装VLAN
set interfaces fe-2/0/1 unit 424 vlan-id 424       ―――――配置子接口&＃xff0c;VLAN 424
set interfaces fe-2/0/1 unit 424 family inet address 192.168.254.146/30  ――配置子接口地址
&＃xff08;2&＃xff09;无需子接口配置
set interfaces fe-2/0/23 unit 0 family inet address 222.60.11.154/29   ――直接配置地址
&＃xff08;3&＃xff09;E1口配置
set interfaces e1-3/0/0 encapsulation ppp 封装链路类型&＃xff0c;包含PPP,HDLC&＃xff0c;根据实际情况配置
set interfaces e1-3/0/0 e1-options framing unframed 封装帧格式&＃xff0c;参数包含unframed,g704, g704-no-crc4
set interfaces e1-3/0/0 unit 0 family inet address 192.168.1.126/30 配置地址
&＃xff08;4&＃xff09;CE1配置
set interfaces ce1-4/0/0 clocking external
set interfaces ce1-4/0/0 e1-options framing g704-no-crc4
set interfaces ce1-4/0/0 partition 1 timeslots 1-31    ――――设置信道1及时隙1&＃xff0d;31
set interfaces ce1-4/0/0 partition 1 interface-type ds  ――――子接口类型DS
set interfaces ds-4/0/0:1 encapsulation ppp         ―――――配置子接口封装ppp
set interfaces ds-4/0/0:1 unit 0 family inet filter input NYYH
set interfaces ds-4/0/0:1 unit 0 family inet address 10.238.173.197/30  ――――配置地址
&＃xff08;5&＃xff09;策略配置
set firewall filter shigonganjuMAS term 1 from source-address 10.238.173.180/30
set firewall filter shigonganjuMAS term 1 then accept
set firewall filter shigonganjuMAS term 2 from source-address 10.238.173.0/24
set firewall filter shigonganjuMAS term 2 from source-address 10.238.179.0/24
set firewall filter shigonganjuMAS term 2 then discard
set firewall filter shigonganjuMAS term 3 then accept

 

set interfaces fe-2/0/0 unit 44 family inet filter input jiaotongyinhangduanxin―――将策略应用至 子接口。
 
日常维护命令
1   查看序列号show chassis hardware
2   查看硬件show chassis hardware
3   查看软件版本show version
4   查看CPU  show chassis routing-engine
5   ping命令
ping 192.168.1.254 rapid    #快速ping地址 
6   查看设备告警信息 show chassis alarms
7   查看详细的硬件温度及状态信息 show chassis environment
8   收集CASE需要的信息request support information

本文出自 “路途拾遗-小侠唐在飞” 博客&＃xff0c;请务必保留此出处http://xiaoxia.blog.51cto.com/23357/163138