热门标签 | HotTags
当前位置:  开发笔记 > 编程语言 > 正文

H3C模拟器pc与防火墙,交换机相连,在pccmd下用telnet访问交换机和防火墙

架构如图实现目的1在pc端,用telnet访问核心交换机10.20.4.2522在pc端,用telnet访问二层交换机10.20.4.253在此之前&#

架构如图

实现目的

1 在pc端,用telnet访问核心交换机10.20.4.252

2 在pc端,用telnet访问二层交换机10.20.4.253

在此之前,pc_4,pc_5与交换机的配置不进行介绍

新建vlan 10 用于管理所有的交换机

##配置二层交换机的telnet管理ip

[sw-2-1]vlan 10
[sw
-2-1-vlan10]int vlan 10
[sw
-2-1-Vlan-interface10]ip address 10.20.4.253
[sw
-2-1-Vlan-interface10]qu
[sw
-2-1]telnet server enable

[sw-2-1]user-interface vty 0 4
[sw
-2-1-line-vty0-4]authentication-mode scheme
[sw
-2-1-line-vty0-4]qu
[sw
-2-1]local-user yhq
[sw
-2-1-luser-manage-yhq]password simple 123
[sw
-2-1-luser-manage-yhq]service-type telnet
[sw
-2-1-luser-manage-yhq]authorization-attribute user-role level-15

##core核心交换机此步骤相同

##telnet 核心交换机//二层交换机
system-view
System View:
return to User View with Ctrl+Z.
[core
-3-1]vlan 10
[core
-3-1-vlan10]int vlan 10
[core
-3-1-Vlan-interface10]dis this
#
interface Vlan-interface10ip address 10.20.4.252 255.255.252.0
#
return
[core
-3-1-Vlan-interface10]qu
[core
-3-1]user-interface vty 0 4
[core
-3-1-line-vty0-4]authentication-mode scheme
[core
-3-1-line-vty0-4]qu
[core
-3-1]local-user yhq
New local user added.
[core
-3-1-luser-manage-yhq]password simple 123
[core
-3-1-luser-manage-yhq]service-type telnet
[core
-3-1-luser-manage-yhq]authorization-attribute user-role level-15
[core
-3-1-luser-manage-yhq]qu
[core
-3-1]telnet server enable

##核心交换机的端口1修改为路由模式,并配置ip和静态路由

system-view
System View:
return to User View with Ctrl+Z.
[core
-3-1]int g1/0/1
[core
-3-1-GigabitEthernet1/0/1]dis this
#
interface GigabitEthernet1/0/1port link-mode bridgeport link-type trunkport trunk permit vlan 1 200 300combo enable fiber
[core
-3-1-GigabitEthernet1/0/1]port link-mode route //配置为路由模式
[core
-3-1-GigabitEthernet1/0/1]ip address 1.1.1.1 30
[core
-3-1-GigabitEthernet1/0/1]qu
[core
-3-1]ip route-static 0.0.0.0 0 1.1.1.2 // 添加路由表,下一条地址为1.1.1.2
[core
-3-1]tracert 10.18.4.2 //跟踪
traceroute to
10.18.4.2 (10.18.4.2), 30 hops at most, 40 bytes each packet, press CTRL_C t
[core
-3-1]display ip routing-table //查看路由表
Destinations :
21 Routes : 21
Destination
/Mask Proto Pre Cost NextHop Interface
0.0.0.0/0 Static 60 0 1.1.1.2 GE1/0/1
0.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0

##fw的端口g1/0/1 配置ip,端口模式为route

system-view
System View:
return to User View with Ctrl+Z.
[fw
-1]int g1/0/1
[fw
-1-GigabitEthernet1/0/1]dis this
#
interface GigabitEthernet1/0/1port link-mode routecombo enable copperip address 1.1.1.2 255.255.255.252
#
return
[fw
-1]int g1/0/0 //端口g1/0/0配置
[fw
-1-GigabitEthernet1/0/0]dis this
#
interface GigabitEthernet1/0/0port link-mode routecombo enable copperip address 10.18.4.250 255.255.252.0nat outbound 2001 address-group 1 no-pat description 1
#
return

在pc的cmd窗口添加路由

C:\Users\Administrator>ping 10.20.4.252
正在 Ping
10.20.4.252 具有 32 字节的数据:
请求超时。
请求超时。
C:\Users\Administrator
>route print
C:\Users\Administrator
>route add 10.20.4.0 mask 255.255.252.0 10.18.4.250操作完成!
C:\Users\Administrator
>ping 10.20.4.252
正在 Ping
10.20.4.252 具有 32 字节的数据:
来自
10.20.4.252 的回复: 字节&#61;32 时间<1ms TTL&#61;254
来自
10.20.4.252 的回复: 字节&#61;32 时间<1ms TTL&#61;254

 ##二层sw-2-1添加路由

[sw-2-1]ip route-static 0.0.0.0 0.0.0.0 1.1.1.2
[sw
-2-1]ip route-static 0.0.0.0 0.0.0.0 10.20.4.252

由于之前防火墙已经开启了web端口&#xff0c;这里telnet就很容易了

在pc的cmd窗口进行telnet 10.20.4.252

在pc的cmd窗口进行telnet 10.20.4.253

最后3个设备的配置文件

fw

[fw-1]dis current-configuration
#
version 7.1.064, Alpha 7164
#
sysname fw-1
#
context Admin id 1
#
telnet server enable
#
irf mac-address persistent timerirf auto-update enableundo irf link-delayirf member 1 priority 1
#
nat address-group 1 name 1address 10.18.4.250 10.18.4.250
#
xbar load-singlepassword-recovery enablelpu-type f-series
#
vlan 1
#
object-group ip address y11security-zone Untrust0 network subnet 10.19.4.0 255.255.252.0
#
object-group ip address y22security-zone Trust0 network subnet 10.18.4.0 255.255.252.0
#
interface NULL0
#
interface GigabitEthernet1/0/0port link-mode routecombo enable copperip address 10.18.4.250 255.255.252.0nat outbound 2001 address-group 1 no-pat description 1
#
interface GigabitEthernet1/0/1port link-mode routecombo enable copperip address 1.1.1.2 255.255.255.252
#
interface GigabitEthernet1/0/2port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/3port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/4port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/5port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/6port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/7port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/8port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/9port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/10port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/11port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/12port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/13port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/14port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/15port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/16port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/17port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/18port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/19port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/20port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/21port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/22port link-mode routecombo enable copper
#
interface GigabitEthernet1/0/23port link-mode routecombo enable copper
#
object-policy ip managerule 0 pass
#
security-zone name Local
#
security-zone name Trustimport interface GigabitEthernet1/0/0
#
security-zone name DMZ
#
security-zone name Untrustimport interface GigabitEthernet1/0/1
#
security-zone name Management
#
zone-pair security source Trust destination Localobject-policy apply ip manage
#
scheduler logfile size 16
#
line class auxuser-role network-operator
#
line class consoleuser-role network-admin
#
line class ttyuser-role network-operator
#
line class vtyuser-role network-operator
#
line aux 0user-role network-admin
#
line con 0authentication-mode schemeuser-role network-admin
#
line vty 0 4authentication-mode schemeuser-role network-admin
#
line vty 5 63user-role network-operator
#
ip route-static 0.0.0.0 0 10.18.4.2ip route-static 10.19.4.0 22 GigabitEthernet1/0/1 1.1.1.1ip route-static 10.20.4.0 22 GigabitEthernet1/0/1 1.1.1.1
#
time-range 1 09:14 to 19:14 daily
#
acl basic 2001rule 0 permit source 10.19.4.0 0.0.3.255
#
domain system
#
aaa session-limit ftp 16aaa session-limit telnet 16aaa session-limit ssh 16domain default enable system
#
role name level-0description Predefined level-0 role
#
role name level-1description Predefined level-1 role
#
role name level-2description Predefined level-2 role
#
role name level-3description Predefined level-3 role
#
role name level-4description Predefined level-4 role
#
role name level-5description Predefined level-5 role
#
role name level-6description Predefined level-6 role
#
role name level-7description Predefined level-7 role
#
role name level-8description Predefined level-8 role
#
role name level-9description Predefined level-9 role
#
role name level-10description Predefined level-10 role
#
role name level-11description Predefined level-11 role
#
role name level-12description Predefined level-12 role
#
role name level-13description Predefined level-13 role
#
role name level-14description Predefined level-14 role
#
user-group system
#
local-user admin class managepassword hash $h$6$tBhNQJuBUd3La7/h$&#43;JNXdiLJ/VASRtMlo1o2qKKJhsNN36EOm7rtF1AccdjJUS60Q3tQaeqqCGXXiaqusgSawzTVnR5yOrVDq1PJzQ&#61;&#61;service-type telnet terminal http httpsauthorization-attribute user-role level-3authorization-attribute user-role network-adminauthorization-attribute user-role network-operator
#
ip http enableip https enable
#
security-policy iprule 0 name trust-to-untrustaction pass
#
return

View Code

core-3-1

dis current-configuration
#
version 7.1.075, Alpha 7571
#
sysname core-3-1
#
clock protocol none
#
telnet server enable
#
irf mac-address persistent timerirf auto-update enableundo irf link-delayirf member 1 priority 1
#
lldp global enable
#
system-working-mode standardxbar load-singlepassword-recovery enablelpu-type f-series
#
vlan 1
#
vlan 10
#
vlan 200
#
vlan 300
#
stp global enable
#
interface NULL0
#
interface Vlan-interface10ip address 10.20.4.252 255.255.252.0
#
interface Vlan-interface200ip address 10.19.4.1 255.255.252.0
#
interface Vlan-interface300ip address 192.168.4.1 255.255.252.0
#
interface FortyGigE1/0/53port link-mode bridge
#
interface FortyGigE1/0/54port link-mode bridge
#
interface GigabitEthernet1/0/1port link-mode routecombo enable fiberip address 1.1.1.1 255.255.255.252
#
interface GigabitEthernet1/0/2port link-mode bridgeport link-type trunkundo port trunk permit vlan 1port trunk permit vlan 10 200 300combo enable fiber
#
interface GigabitEthernet1/0/3port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/4port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/5port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/6port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/7port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/8port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/9port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/10port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/11port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/12port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/13port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/14port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/15port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/16port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/17port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/18port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/19port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/20port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/21port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/22port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/23port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/24port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/25port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/26port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/27port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/28port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/29port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/30port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/31port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/32port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/33port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/34port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/35port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/36port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/37port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/38port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/39port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/40port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/41port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/42port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/43port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/44port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/45port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/46port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/47port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/48port link-mode bridgecombo enable fiber
#
interface M-GigabitEthernet0/0/0
#
interface Ten-GigabitEthernet1/0/49port link-mode bridgecombo enable fiber
#
interface Ten-GigabitEthernet1/0/50port link-mode bridgecombo enable fiber
#
interface Ten-GigabitEthernet1/0/51port link-mode bridgecombo enable fiber
#
interface Ten-GigabitEthernet1/0/52port link-mode bridgecombo enable fiber
#
scheduler logfile size 16
#
line class auxuser-role network-operator
#
line class consoleuser-role network-admin
#
line class ttyuser-role network-operator
#
line class vtyuser-role network-operator
#
line aux 0user-role network-operator
#
line con 0user-role network-admin
#
line vty 0 4authentication-mode schemeuser-role network-operator
#
line vty 5 63user-role network-operator
#
ip route-static 0.0.0.0 0 1.1.1.2ip route-static 10.20.4.0 22 10.20.4.252ip route-static 10.20.4.0 22 1.1.1.2
#
ntp-service unicast-server 10.20.4.253
#
radius scheme systemuser-name-format without-domain
#
domain name system
#
domain default enable system
#
role name level-0description Predefined level-0 role
#
role name level-1description Predefined level-1 role
#
role name level-2description Predefined level-2 role
#
role name level-3description Predefined level-3 role
#
role name level-4description Predefined level-4 role
#
role name level-5description Predefined level-5 role
#
role name level-6description Predefined level-6 role
#
role name level-7description Predefined level-7 role
#
role name level-8description Predefined level-8 role
#
role name level-9description Predefined level-9 role
#
role name level-10description Predefined level-10 role
#
role name level-11description Predefined level-11 role
#
role name level-12description Predefined level-12 role
#
role name level-13description Predefined level-13 role
#
role name level-14description Predefined level-14 role
#
user-group system
#
local-user yhq class managepassword hash $h$6$MyuRhIJeandoymXE$5SKNyQVYMgZZm6cJ6nMtUTz4HMCFAIGTjpTJOkX3l09oAnmS3NjZj2E7h1KGFMVk3XYzRqdsKYKI4bKc1HZmiQ&#61;&#61;service-type telnetauthorization-attribute user-role level-15authorization-attribute user-role network-operator
#
return

View Code

sw-2-1

dis current-configuration
#
version 7.1.075, Alpha 7571
#
sysname sw-2-1
#
telnet server enable
#
irf mac-address persistent timerirf auto-update enableundo irf link-delayirf member 1 priority 1
#
lldp global enable
#
system-working-mode standardxbar load-singlepassword-recovery enablelpu-type f-series
#
vlan 1
#
vlan 10
#
vlan 200
#
vlan 300
#
stp global enable
#
interface NULL0
#
interface Vlan-interface10ip address 10.20.4.253 255.255.252.0
#
interface Vlan-interface200
#
interface FortyGigE1/0/53port link-mode bridge
#
interface FortyGigE1/0/54port link-mode bridge
#
interface GigabitEthernet1/0/1port link-mode bridgeport link-type trunkundo port trunk permit vlan 1port trunk permit vlan 10 200 300combo enable fiber
#
interface GigabitEthernet1/0/2port link-mode bridgeport access vlan 200combo enable fiber
#
interface GigabitEthernet1/0/3port link-mode bridgeport access vlan 300combo enable fiber
#
interface GigabitEthernet1/0/4port link-mode bridgeport access vlan 200combo enable fiber
#
interface GigabitEthernet1/0/5port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/6port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/7port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/8port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/9port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/10port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/11port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/12port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/13port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/14port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/15port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/16port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/17port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/18port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/19port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/20port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/21port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/22port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/23port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/24port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/25port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/26port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/27port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/28port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/29port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/30port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/31port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/32port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/33port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/34port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/35port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/36port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/37port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/38port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/39port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/40port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/41port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/42port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/43port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/44port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/45port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/46port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/47port link-mode bridgecombo enable fiber
#
interface GigabitEthernet1/0/48port link-mode bridgecombo enable fiber
#
interface M-GigabitEthernet0/0/0
#
interface Ten-GigabitEthernet1/0/49port link-mode bridgecombo enable fiber
#
interface Ten-GigabitEthernet1/0/50port link-mode bridgecombo enable fiber
#
interface Ten-GigabitEthernet1/0/51port link-mode bridgecombo enable fiber
#
interface Ten-GigabitEthernet1/0/52port link-mode bridgecombo enable fiber
#
scheduler logfile size 16
#
line class auxuser-role network-operator
#
line class consoleuser-role network-admin
#
line class ttyuser-role network-operator
#
line class vtyuser-role network-operator
#
line aux 0user-role network-operator
#
line con 0user-role network-admin
#
line vty 0 4authentication-mode schemeuser-role level-3user-role network-operatorset authentication password hash $h$6$LC3L/BBb1SYECRjg$Yt1smXHJIWusWQRLQiRc37xYCUcOs4hahYotExTAb261NBODmPW/4xruBr8pz7DenOdlDkvpzSofLC5qfv0qkA&#61;&#61;
#
line vty 5 63user-role network-operator
#
ip route-static 0.0.0.0 0 1.1.1.2ip route-static 0.0.0.0 0 1.1.1.1ip route-static 0.0.0.0 0 10.20.4.252
#
ntp-service refclock-master 2
#
radius scheme systemuser-name-format without-domain
#
domain name system
#
domain default enable system
#
role name level-0description Predefined level-0 role
#
role name level-1description Predefined level-1 role
#
role name level-2description Predefined level-2 role
#
role name level-3description Predefined level-3 role
#
role name level-4description Predefined level-4 role
#
role name level-5description Predefined level-5 role
#
role name level-6description Predefined level-6 role
#
role name level-7description Predefined level-7 role
#
role name level-8description Predefined level-8 role
#
role name level-9description Predefined level-9 role
#
role name level-10description Predefined level-10 role
#
role name level-11description Predefined level-11 role
#
role name level-12description Predefined level-12 role
#
role name level-13description Predefined level-13 role
#
role name level-14description Predefined level-14 role
#
user-group system
#
local-user yhq class managepassword hash $h$6$2tMr2Zq84CM2cTGZ$0y06oUKk0a1&#43;YnpPDapjOURe46hUuz0qULjIQMTuMhDBboWPydxqEDtvoprqDrX&#43;wjH7FR5fVIaWvQC9l5yD3Q&#61;&#61;service-type telnetauthorization-attribute idle-cut 5authorization-attribute user-role level-3authorization-attribute user-role level-15authorization-attribute user-role network-operator
#
return

View Code

在初学使用阶段&#xff0c;如有不正&#xff0c;请提示~~谢谢&#xff01;&#xff01;


转载于:https://www.cnblogs.com/yhq1314/p/11419953.html


推荐阅读
author-avatar
重生之羽
这个家伙很懒,什么也没留下!
PHP1.CN | 中国最专业的PHP中文社区 | DevBox开发工具箱 | json解析格式化 |PHP资讯 | PHP教程 | 数据库技术 | 服务器技术 | 前端开发技术 | PHP框架 | 开发工具 | 在线工具
Copyright © 1998 - 2020 PHP1.CN. All Rights Reserved | 京公网安备 11010802041100号 | 京ICP备19059560号-4 | PHP1.CN 第一PHP社区 版权所有