send/receiveh264/aacfile/databyrtp/rtspoverudp/tcp

一、安装一些必要的调试工具

1、vlc安装
sudo apt-get install vlc
sudo apt-get install vlc-nox

2、ffmpeg安装&＃xff0c;带ffplay&＃xff0c;ffplay依赖sdl库

源码都是三步安装./configure && make && sudo make install

以下安装顺序不能乱

yasm 1.2.0.tar.gz

sudo apt-get install libx11-dev
sudo apt-get install xorg-dev

SDL2-2.0.8.tar.gz

ffmpeg-4.1.tar.bz2

3、ffplay编译起来真麻烦&＃xff0c;还不如用mplayer和vlc

sudo apt-get install mplayer

二、h264/aac数据的rtp/rtsp收发

早年用live555来开发摄像机&＃xff0c;虽然已经有了较完善的解析&＃xff0c;封装等功能模块&＃xff0c;但是live555代码嵌套太深&＃xff0c;看起来费劲。

网上搜了一下&＃xff0c;有很多的数据处理的小demo&＃xff0c;都列举到此吧&＃xff0c;大多数我都跑通了。

1、Send H264 file by RTP over UDP

https://github.com/hmgle/h264_to_rtp

https://github.com/tinydigger/RTPH264Streaming

2、Here is a simply using of rtp/rtsp protocol pushing .h264 object to a VLC client (single video)

https://github.com/GitDolhpin/simple_rtsp

3、Push the h.264 data through the rtp protocol, It can be played in the VLC player/Mplayer

https://github.com/licaibiao/rtp_push_h264

4、Encode h264 data to RTP package and Streaming through network

Use gstreamer as receiver&＃xff0c;Run &＃39;rtpencoder test.264 127.0.0.1 5004&＃39; as sender

https://github.com/tinydigger/RTPH264Streaming

5、use python to unpacketize rtp h264 packet

python rtph264.py This file can simply dump the rtp h264 packet to file from gstreamer

https://github.com/iantuan/rtp_h264

6、convert a binary h264 rtp packet file to h264 file

https://github.com/bill-hu/rtp2h264

7、RTP抓包文件导出H.264 Payload的Wireshark插件&＃xff0c;感谢这位同学做了这么方便的工具

https://blog.csdn.net/jasonhwang/article/details/7359095#

8、H264 RTP打包发送和接收解包

H264 RTP打包发送

https://blog.csdn.net/anobodykey/article/details/7872027

H264 RTP解包

https://blog.csdn.net/anobodykey/article/details/7876047

9、rtp封包/分析/发送

(转)VLC播放RTP打包发送的.264文件

https://www.cnblogs.com/tangxiacun/p/4446009.html

(转)RTP-H264封包分析

https://www.cnblogs.com/tangxiacun/p/4493431.html

10、rtsp over udp

https://www.cnblogs.com/tangxiacun/p/4497786.html