Centos7,Torque单节点部署

1.准备工作

安装Torque必须首先配置linux主机名称，服务器主机名称大多默认localhost,不建议直接使用localhost。

linux主机名称修改地址：http://www.cnblogs.com/smbin/p/8488909.html

linux系统：Centos 7

主机名称：master

系统用户：root

Torque官网下载地址：http://www.adaptivecomputing.com/support/download-center/torque-download/

作者下载的版本：http://wpfilebase.s3.amazonaws.com/torque/torque-6.1.2.tar.gz

2.安装和配置Torque

首先在/opt下创建文件夹torque，在此文件夹中下载压缩包，并解压下载并解压Torque文件

[[email protected] ]# cd /opt
[[email protected] ]# mkdir torque
[[email protected] ]# cd torque
[[email protected] torque]# wget http://wpfilebase.s3.amazonaws.com/torque/torque-6.1.2.tar.gz
......省略下载过程
[[email protected] torque]# tar -zxvf torque-6.1.2.tar.gz
......省略解压过程
[[email protected] torque]#cd torque-6.1.2/
[[email protected] torque-6.1.2]#

加载、安装和master配置。master配置就是主机和PBS之间的配置，master就是主机名

[[email protected] torque-6.1.2]# yum install libxml2-devel openssl-devel gcc gcc-c++ boost-devel libtool-y
Loaded plugins: fastestmirror, langpacks
base | 3.6 kB 00:00:00
extras | 3.4 kB 00:00:00
mysql-connectors-community | 2.5 kB 00:00:00
mysql-tools-community | 2.5 kB 00:00:00
mysql56-community | 2.5 kB 00:00:00
updates | 3.4 kB 00:00:00
Determining fastest mirrors
* base: mirrors.cn99.com
* extras: mirrors.tuna.tsinghua.edu.cn
* updates: mirrors.tuna.tsinghua.edu.cn
Package libxml2-devel-2.9.1-6.el7_2.3.x86_64 already installed and latest version
Package 1:openssl-devel-1.0.2k-8.el7.x86_64 already installed and latest version
Package gcc-4.8.5-16.el7_4.1.x86_64 already installed and latest version
Package gcc-c++-4.8.5-16.el7_4.1.x86_64 already installed and latest version
Package boost-devel-1.53.0-27.el7.x86_64 already installed and latest version
No package libtool-y available.
Nothing to do
[[email protected] torque-6.1.2]# ./configure --prefix=/usr/local/torque --with-scp--with-default-server=master
......省略加载过程
Building components: server=yes mom=yes clients=yes
gui=no drmaa=no pam=no
PBS Machine type : linux
Remote copy : /bin/scp -rpB
PBS home : /var/spool/torque
Default server : master
Unix Domain sockets :
Linux cpusets : no
Tcl : disabled
Tk : disabled
Authentication : trqauthd
configure: WARNING: This compilation has strict compiler options enabled that cause
the build to fail if any compiler warnings are emitted. If this build fails
because of a harmless warning, please report the problem to [email protected]org
and run configure again without --enable-gcc-warnings.
Ready for 'make'.
[[email protected] torque-6.1.2]# make
......省略加载过程
[[email protected] torque-6.1.2]# make install
......省略加载过程
[[email protected] torque-6.1.2]# make packages

  [[email protected] torque-6.1.2]# make packages
  Building packages from /opt/torque/torque-6.1.2/tpackages
  rm -rf /opt/torque/torque-6.1.2/tpackages
  mkdir /opt/torque/torque-6.1.2/tpackages
  Building ./torque-package-server-linux-x86_64.sh ...
  libtool: install: warning: remember to run `libtool --finish /usr/local/torque/lib'　　　　　　　　　　//需要去执行命令：libtool --finish /usr/local/torque/lib
  Building ./torque-package-mom-linux-x86_64.sh ...
  libtool: install: warning: remember to run `libtool --finish /usr/local/torque/lib'
  Building ./torque-package-clients-linux-x86_64.sh ...
  libtool: install: warning: remember to run `libtool --finish /usr/local/torque/lib'
  Building ./torque-package-devel-linux-x86_64.sh ...
  libtool: install: warning: remember to run `libtool --finish /usr/local/torque/lib'
  Building ./torque-package-doc-linux-x86_64.sh ...
  Done.

  The package files are self-extracting packages that can be copied
  and executed on your production machines. Use --help for options.
  [[email protected] torque-6.1.2]# libtool --finish /usr/local/torque/lib
  libtool: finish: PATH="/usr/lib/jvm/java-1.7.0-openjdk/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin:/usr/local/torque/bin:/usr/local/torque/sbin:/root/bin:/sbin" ldconfig -n /usr/l   ocal/torque/lib
  ----------------------------------------------------------------------
  Libraries have been installed in:
  /usr/local/torque/lib

  If you ever happen to want to link against installed libraries
  in a given directory, LIBDIR, you must either use libtool, and
  specify the full pathname of the library, or use the `-LLIBDIR'
  flag during linking and do at least one of the following:
  - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
  during execution
  - add LIBDIR to the `LD_RUN_PATH' environment variable
  during linking
  - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
  - have your system administrator add LIBDIR to `/etc/ld.so.conf'

  See any operating system documentation about shared libraries for
  more information, such as the ld(1) and ld.so(8) manual pages.

 配置服务：pbs_server PBS，pbs_sched，pbs_mom，trqauthd

[[email protected] torque-6.1.2]# cp contrib/init.d/{pbs_{server,sched,mom},trqauthd} /etc/init.d/
[[email protected] torque-6.1.2]# for i in pbs_server pbs_sched pbs_mom trqauthd; do chkconfig --add $i; chkconfig $i on; done　　　　　　//遇见y/n选择y回车继续

设置Torque环境变量

[[email protected] torque-6.1.2]# TORQUE=/usr/local/torque
[[email protected] torque-6.1.2]# echo "TORQUE=$TORQUE" >> /etc/profile
[[email protected] torque-6.1.2]# echo "export PATH=\$PATH:$TORQUE/bin:$TORQUE/sbin" >> /etc/profile
[[email protected] torque-6.1.2]# source /etc/profile

以root用户启动，报错服务指向的主机名和现有主机名不一致，安装过程中暂时没有找到解决方案！安装完毕后有解决方案，在本文最下方！！！

[[email protected] torque-6.1.2]# ./torque.setup root　　　　　　　　　　//尝试以root启动，报错：服务“pbs_server”已经启动
initializing TORQUE (admin: root)
pbs_server already running... run 'qterm' to stop pbs_server and rerun　　　　　　　　　　//运行sterm关闭服务
[[email protected] torque-6.1.2]# qterm　　　　　　　　　　　　　　　　　　　　　　　　//发现服务指向的主机名称和正常显示的主机名称不一致，命令qterm无法关闭
Can not resolve name for server mastar. (rc = -2 - )
Cannot resolve specified server host 'mastar'.
qterm: could not connect to server '' (15010) Access from host not allowed, or unknown host
[[email protected] mom_priv]# ps -e | grep pbs　　　　　　　　　　//查询服务，尝试以kill -9命令关闭服务
30505 ? 00:00:00 pbs_server
[[email protected] mom_priv]# kill -9 30505
[[email protected] mom_priv]# ps -e | grep pbs
[[email protected] torque-6.1.2]# ./torque.setup root　　　　　　　　//发现服务关闭后仍无法启动，服务指向的主机名和现有主机名不一致！经确认上边配置的时候没有配置错误：
　　　　　　　　　　　　　　　　　　　　　　　　　　　//‘./configure --prefix=/usr/local/torque --with-scp--with-default-server=master’ configure没有错误，未找到解决方案，怀疑是系统缓存的问题。
initializing TORQUE (admin: root)　　　　　　　　　　　　　　//暂时只能修改/etc/hosts文件的内容
　　　　
You have selected to start pbs_server in create mode.
If the server database exists it will be overwritten.
do you wish to continue y/(n)?y
Can not resolve name for server mastar. (rc = -2 - )
Cannot resolve specified server host 'mastar'.
qmgr: cannot connect to server (errno=15010) Access from host not allowed, or unknown host
ERROR: cannot set [email protected] in operators list
Can not resolve name for server mastar. (rc = -2 - )
Cannot resolve specified server host 'mastar'.
qterm: could not connect to server '' (15010) Access from host not allowed, or unknown host
[[email protected] torque-6.1.2]# vi /etc/hosts　　　　　　　　　　　　//修改/etc/hosts文件
10.131.101.142 master
10.131.101.142 mastar　　　　　　　　//添加这一行的内容
27.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6

  [[email protected] torque-6.1.2]# ./torque.setup root　　　　　　　　　　　　//此时执行成功
  initializing TORQUE (admin: root)

  You have selected to start pbs_server in create mode.
  If the server database exists it will be overwritten.
  do you wish to continue y/(n)?y　　　　　　　　　　//输入y

开始pbs_server，pbs_sched服务，pbs_mom和trqauthd

[[email protected] torque-6.1.2]# qterm　　　　　　　　　　//关闭服务
[[email protected] torque-6.1.2]# for i in pbs_server pbs_sched pbs_mom trqauthd; do service $i start; done
Starting pbs_server (via systemctl): [ OK ]
Starting pbs_sched (via systemctl): [ OK ]
Starting pbs_mom (via systemctl): [ OK ]
Starting trqauthd (via systemctl): [ OK ]

指定计算节点

添加计算节点”master”，设置CPU的数量

检查CPU的数量通过使用命令“lscpu”或“nproc”

[[email protected] torque-6.1.2]# vi /var/spool/torque/server_priv/nodes
master np=8　　　　　　　　　　//添加本行信息，注意等号前后不要有空格 master是主机名
[[email protected] torque-6.1.2]# vi /var/spool/torque/mom_priv/config
pbsserver master　　　　　　　　//添加这两行信息 master是主机名
logevent 255

检查PBS的信息

[[email protected] torque-6.1.2]# ps -e | grep pbs
11188 ? 00:00:00 pbs_sched
11215 ? 00:00:00 pbs_mom
29683 ? 00:00:00 pbs_server
[[email protected] torque-6.1.2]# for i in pbs_server pbs_sched pbs_mom trqauthd; do service $i restart; done
Restarting pbs_server (via systemctl): [ OK ]
Restarting pbs_sched (via systemctl): [ OK ]
Restarting pbs_mom (via systemctl): [ OK ]
Restarting trqauthd (via systemctl): [ OK ]

创建队列的默认信息

[[email protected] torque-6.1.2]# qmgr -c 'create queue master'
[[email protected] torque-6.1.2]# qmgr -c 'set queue master queue_type= execution'
[[email protected] torque-6.1.2]# qmgr -c 'set queue master started= true'
[[email protected] torque-6.1.2]# qmgr -c 'set queue master enabled= true'
[[email protected] torque-6.1.2]# qmgr -c 'set queue master resources_default.walltime= 240:00:00'
[[email protected] torque-6.1.2]# qmgr -c 'set queue master resources_default.nodes= 1'
[[email protected] torque-6.1.2]# qmgr -c 'set server default_queue= master'

 提交任务测试：

[[email protected] torque-6.1.2]# qnodes　　　　　　//查询计算节点的状态
master
state = free
power_state = Running
np = 8
ntype = cluster
status = opsys=linux,uname=Linux master 3.10.0-514.el7.x86_64 #1 SMP Tue Nov 22 16:42:41 UTC 2016 x86_64,sessiOns=3154 3489 41105 41699,nsessiOns=4,nusers=3,idletime=3198,
　　　　totmem=94868512kb,availmem=92195284kb,physmem=32367652kb,ncpus=56,loadave=0.85,gres=,netload=4005925534,state=free,varattr= ,cpuclock=Fixed,macaddr=68:cc:6e:c3:cf:87,version=6.1.2,rectime=1519980694,jobs=
mom_service_port = 15002
mom_manager_port = 15003
[[email protected] torque-6.1.2]# su master　　　　　　　　//切换用户：此master不是主机名，而是一个用户的名字
[[email protected] torque-6.1.2]$ echo sleep 10 | qsub
0.master
[[email protected] torque-6.1.2]$ qstat　　　　　　　　//查询任务状态
Job ID Name User Time Use S Queue
------------------------- ---------------- --------------- -------- - -----
0.master STDIN master 0 R master
[[email protected] torque-6.1.2]$ qstat -a -n　　　　　　//查询任务状态和每个任务占用cpu核数
master:
Req'd Req'd Elap
Job ID Username Queue Jobname SessID NDS TSK Memory Time S Time
----------------------- ----------- -------- ---------------- ------ ----- ------ --------- --------- - ---------
0.master master master STDIN 12470 1 1 -- 240:00:00 C --
master/0
[[email protected] torque-6.1.2]$

主机名和现有主机名不一致的问题解决方案：

 这个问题一直没有找到出现的原因，但是怀疑是之前的Torque删除时没有删除干净，在“创建队列的默认信息”这一步的缓存依然存在。

在Torque安装成功后，停止Torque

[[email protected] torque-6.1.2]# for i in pbs_server pbs_sched pbs_mom trqauthd; do service $i stop; done　　　　　　　　//停止服务T，start改为stop
Stopping pbs_server (via systemctl): [ OK ]
Stopping pbs_sched (via systemctl): [ OK ]
Stopping pbs_mom (via systemctl): [ OK ]
Stopping trqauthd (via systemctl): [ OK ]
[[email protected] torque-6.1.2]# ./torque.setup root　　　　　　　　//重新运行这一步
hostname: master
Currently no servers active. Default server will be listed as active server. Error 15133
Active server name: master pbs_server port is: 15001
trqauthd daemonized - port /tmp/trqauthd-unix
trqauthd successfully started
initializing TORQUE (admin: root)
You have selected to start pbs_server in create mode.
If the server database exists it will be overwritten.
do you wish to continue y/(n)?y　　　　　　　　　　//输入y
[[email protected] torque-6.1.2]# vi /var/spool/torque/server_priv/nodes
master np=8 　　　　　　　　　　//=前后不要带空格
[[email protected] torque-6.1.2]# qterm　　　　　　　　　　//关闭pbs_server、 pbs_sched、 pbs_mom、 trqauthd服务
[[email protected] torque-6.1.2]# for i in pbs_server pbs_sched pbs_mom trqauthd; do service $i start; done　　　　　　　　//重启服务
Starting pbs_server (via systemctl): [ OK ]
Starting pbs_sched (via systemctl): [ OK ]
Starting pbs_mom (via systemctl): [ OK ]
Starting trqauthd (via systemctl): [ OK ]

  [[email protected] torque-6.1.2]# qnodes　　　　　　　　　　//查询状态，报错服务trqauthd没有启动
  socket_connect_unix failed: 15137
  qnodes: cannot connect to server master, error=15137 (could not connect to trqauthd)
  [[email protected] torque-6.1.2]# for i in pbs_server pbs_sched pbs_mom trqauthd; do service $i restart; done　　　　　　　　//重新启动服务
  Restarting pbs_server (via systemctl): [ OK ]
  Restarting pbs_sched (via systemctl): [ OK ]
  Restarting pbs_mom (via systemctl): [ OK ]
  Restarting trqauthd (via systemctl): [ OK ]

[[email protected] torque-6.1.2]# qnodes　　　　　　//查询状态，成功
master
state = free
power_state = Running
np = 8
ntype = cluster
status = opsys=linux,uname=Linux master 3.10.0-514.el7.x86_64 #1 SMP Tue Nov 22 16:42:41 UTC 2016 x86_64,sessiOns=3154 3489 10903 41105 41699,nsessiOns=5,nusers=4,idletime=5287,totmem=94868512kb,
availmem=92236268kb,physmem=32367652kb,ncpus=56,loadave=0.01,gres=,netload=8920006882,state=free,varattr= ,cpuclock=Fixed,macaddr=68:cc:6e:c3:cf:87,version=6.1.2,rectime=1519982783,jobs=
mom_service_port = 15002
mom_manager_port = 15003