微信小程序倒计时组件实现代码

function countdown(that) {
 var secOnd= that.data.second
 if (secOnd== 0) {
  // console.log("Time Out...");
  that.setData({
   second: "Time Out..."
  });
  return ;
 }
 var time = setTimeout(function(){
  that.setData({
   second: second - 1
  });
  countdown(that);
 }
 ,1000)
}

Page({
  data: {
    second: 3
  },
  onLoad: function() {
    countdown(this);
  }
});

/* 秒级倒计时 */
function countdown(that) {
 var secOnd= that.data.second
 if (secOnd== 0) {
  that.setData({
   second: "Time out!",
   micro_second: "micro_second too."
  });
  clearTimeout(micro_timer);
  return ;
 }
 var timer = setTimeout(function(){
  that.setData({
   second: second - 1
  });
  countdown(that);
 }
 ,1000)
}

/* 毫秒级倒计时 */
// 初始毫秒数，同时用作归零
var micro_second_init = 100;
// 当前毫秒数
var micro_second_current = micro_second_init;
// 毫秒计时器
var micro_timer;

function countdown4micro(that) {
 if (micro_second_current <= 0) {
  micro_second_current = micro_second_init;
 }
 micro_timer = setTimeout(function(){
  that.setData({
   micro_second: micro_second_current - 1
  });
  micro_second_current--;
  countdown4micro(that);
 }
 ,10)
}

Page({
  data: {
    second: 2,
    micro_second: micro_second_init
  },
  onLoad: function() {
    countdown(this);
    countdown4micro(this);
  }
});

second: {{second}}s

{{micro_second}}

function dateformat(second) {
  var dateStr = "";
  var hr = Math.floor(second / 3600);
  var min = Math.floor((second - hr * 3600) / 60);
  var sec = (second - hr * 3600 - min * 60);// equal to => var sec = second % 60;
  dateStr = hr + ":" + min + ":" + sec;
  return dateStr;
}
目前有2个时钟，影响性能，合并下去掉countdown，于是countdown4micro变成以下的样子：

function countdown4micro(that) {

  var loop_secOnd= Math.floor(loop_index / 100);
  // 得知经历了1s
  if (cost_micro_second != loop_second) {
    // 赋予新值
    cost_micro_secOnd= loop_second;
    // 总秒数减1
    total_second--;

  }
   // 每隔一秒，显示值减1; 渲染倒计时时钟
  that.setData({
   clock:dateformat(total_second - 1)
  });

   if (total_secOnd== 0) {
    that.setData({
     // micro_second: "",
     clock:"时间到"
    });
    clearTimeout(micro_timer);
    return ;
   }  

 if (micro_second_current <= 0) {
  micro_second_current = micro_second_init;
 }
 micro_timer = setTimeout(function(){
  that.setData({
   micro_second: micro_second_current - 1
  });
  micro_second_current--;
  // 放在最后++，不然时钟停止时还有10毫秒剩余
  loop_index ++;
  countdown4micro(that);
 }
 ,10)
}

/** 
 * 需要一个目标日期，初始化时，先得出到当前时间还有剩余多少秒
 * 1.将秒数换成格式化输出为XX天XX小时XX分钟XX秒 XX
 * 2.提供一个时钟，每10ms运行一次，渲染时钟，再总ms数自减10
 * 3.剩余的秒次为零时，return，给出tips提示说，已经截止
 */

// 定义一个总毫秒数，以一分钟为例。TODO，传入一个时间点，转换成总毫秒数
var total_micro_secOnd= 2 * 1000;

/* 毫秒级倒计时 */
function countdown(that) {
   // 渲染倒计时时钟
   that.setData({
     clock:dateformat(total_micro_second)
   });

   if (total_micro_second <= 0) {
     that.setData({
       clock:"已经截止"
     });
     // timeout则跳出递归
     return ;
   }  
   setTimeout(function(){
    // 放在最后--
    total_micro_second -= 10;
    countdown(that);
  }
  ,10)
}

// 时间格式化输出，如3:25:19 86。每10ms都会调用一次
function dateformat(micro_second) {
   // 秒数
   var secOnd= Math.floor(micro_second / 1000);
   // 小时位
   var hr = Math.floor(second / 3600);
   // 分钟位
   var min = Math.floor((second - hr * 3600) / 60);
   // 秒位
  var sec = (second - hr * 3600 - min * 60);// equal to => var sec = second % 60;
  // 毫秒位，保留2位
  var micro_sec = Math.floor((micro_second % 1000) / 10);
  return hr + ":" + min + ":" + sec + " " + micro_sec;
}

Page({
  data: {
    clock: ''
  },
  onLoad: function() {
    countdown(this);
  }
});