Qt使用QPainter绘制3D立方体

//立方体前后四个顶点，从右上角开始顺时针
vertexArr=QVector{
 QVector3D{1,1,1},
 QVector3D{1,-1,1},
 QVector3D{-1,-1,1},
 QVector3D{-1,1,1},
 
 QVector3D{1,1,-1},
 QVector3D{1,-1,-1},
 QVector3D{-1,-1,-1},
 QVector3D{-1,1,-1} };
 
 //六个面，一个面包含四个顶点
 elementArr=QVector>{
 {0,1,2,3},
 {4,5,6,7},
 {0,4,5,1},
 {1,5,6,2},
 {2,6,7,3},
 {3,7,4,0} };

#ifndef MYCUBE_H
#define MYCUBE_H
 
#include 
#include 
 
#include 
#include 
 
class MyCube : public QWidget
{
  Q_OBJECT
public:
  explicit MyCube(QWidget *parent = nullptr);
 
protected:
  void paintEvent(QPaintEvent *event) override;
  void mousePressEvent(QMouseEvent *event) override;
  void mouseMoveEvent(QMouseEvent *event) override;
  void mouseReleaseEvent(QMouseEvent *event) override;
 
  QPointF getPoint(const QVector3D &vt,int w) const;
 
private:
  QVector vertexArr;   //八个顶点
  QVector> elementArr; //六个面
  QMatrix4x4 rotateMat;   //旋转矩阵
  QPoint mousePos;      //鼠标位置
  bool mousePressed=false;  //鼠标按下标志位
};
 
#endif // MYCUBE_H

#include "MyCube.h"
 
#include 
#include 
#include 
 
MyCube::MyCube(QWidget *parent)
  : QWidget(parent)
{
  //     7------------------4
  //    /         / |
  //   3------------------0  |
  //   |         |  |
  //   |         |  |
  //   |         |  |
  //   |         |  |
  //   |  6       |  5
  //   |         | /
  //   2------------------1
  //立方体前后四个顶点，从右上角开始顺时针
  vertexArr=QVector{
      QVector3D{1,1,1},
      QVector3D{1,-1,1},
      QVector3D{-1,-1,1},
      QVector3D{-1,1,1},
 
      QVector3D{1,1,-1},
      QVector3D{1,-1,-1},
      QVector3D{-1,-1,-1},
      QVector3D{-1,1,-1} };
 
  //六个面，一个面包含四个顶点
  elementArr=QVector>{
  {0,1,2,3},
  {4,5,6,7},
  {0,4,5,1},
  {1,5,6,2},
  {2,6,7,3},
  {3,7,4,0} };
 
  setFocusPolicy(Qt::ClickFocus); //Widget默认没有焦点
}
 
void MyCube::paintEvent(QPaintEvent *event)
{
  Q_UNUSED(event)
  QPainter painter(this);
  //先画一个白底黑框
  painter.fillRect(this->rect(),Qt::white);
  QPen pen(Qt::black);
  painter.setPen(pen);
  painter.drawRect(this->rect().adjusted(0,0,-1,-1)); //右下角会超出范围
 
  //思路，找到z值最高的顶点，然后绘制该顶点相邻的面
  // 根据z值计算，近大远小
  //（此外，Qt是屏幕坐标系，原点在左上角）
 
  //矩形边框参考大小
  const int cube_width=(width()>height()&＃63;height():width())/4;
 
  //投影矩阵
  //（奇怪，为什么只是平移了z轴，没用perspective函数就有远小近大的效果，
  //在我的想象中默认不该是正交投影么）
  QMatrix4x4 perspective_mat;
  perspective_mat.translate(0.0f,0.0f,-0.1f);
 
  //计算顶点变换后坐标，包含z值max点就是正交表面可见的，
  //再计算下远小近大的透视投影效果齐活了
  QList vertex_list; //和矩阵运算后的顶点
  QList vertex_max_list; //top顶点在arr的位置
  float vertex_max_value;   //top值
  //根据旋转矩阵计算每个顶点
  for(int i=0;ivertex_max_value){
        vertex_max_list.clear();
        vertex_max_list.push_back(i);
        vertex_max_value=vertex.z();
      }else if(abs(vertex.z()-vertex_max_value)<(1E-7)){
        vertex_max_list.push_back(i);
      }
    }
  }
 
  //把原点移到中间来
  painter.save();
  painter.translate(width()/2,height()/2);
  //绘制front和back六个面，先计算路径再绘制
  QList element_path_list; //每个面路径
  QList element_z_values;  //每个面中心点的z值
  QList element_z_points; //每个面中心点在平面对应xy值
  QList element_front_list;  //elementArr中表面的index
  for(int i=0;i element_front_remove;
  for(int i=0;ielement_z_values.at(index_j)
          &&element_path_list.at(index_i).contains(element_z_points.at(index_j))){
        element_front_remove.push_back(index_j);
      }
    }
  }
  for(int index:element_front_remove){
    element_front_list.removeOne(index);
  }
 
  //根据计算好的路径绘制
  painter.setRenderHint(QPainter::Antialiasing,true);
  //画表面
  for(auto index:element_front_list){
    painter.fillPath(element_path_list.at(index),Qt::green);
  }
  //画被遮盖面的边框虚线
  painter.setPen(QPen(Qt::white,1,Qt::DashLine));
  for(int i=0;ipos();
  QWidget::mousePressEvent(event);
}
 
void MyCube::mouseMoveEvent(QMouseEvent *event)
{
  if(mousePressed){
    const QPoint posOffset=event->pos()-mousePos;
    mousePos=event->pos();
    //旋转矩阵 x和y分量
    //rotateMat.rotate(posOffset.x(),QVector3D(0.0f,-0.5f,0.0f));
    //rotateMat.rotate(posOffset.y(),QVector3D(0.5f,0.0f,0.0f));
    rotateMat.rotate(1.1f,QVector3D(0.5f*posOffset.y(),-0.5f*posOffset.x(),0.0f));
    update();
  }
  QWidget::mouseMoveEvent(event);
}
 
void MyCube::mouseReleaseEvent(QMouseEvent *event)
{
  mousePressed=false;
  QWidget::mouseReleaseEvent(event);
}
 
QPointF MyCube::getPoint(const QVector3D &vt,int w) const
{
  //可以用z来手动计算远小近大，也可以矩阵运算
  //const float z_offset=vt.z()*0.1;
  //return QPointF{ vt.x()*w*(1+z_offset), vt.y()*w*(1+z_offset) };
  return QPointF{ vt.x()*w, vt.y()*w };
}