一、查看SSD云盘
sudo fdisk -l Disk /dev/vda: 42.9 GB, 42949672960 bytes, 83886080 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk label type: dos Disk identifier: 0x635e6c7d Device Boot Start End Blocks Id System /dev/vda1 2048 83886079 41942016 83 Linux Disk /dev/vdb: 107.4 GB, 107374182400 bytes, 209715200 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes
可以看到SSD系统已经识别为/dev/vdb
二、格式化云盘
sudo mkfs.ext4 /dev/vdb mke2fs 1.42.9 (28-Dec-2013) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 6553600 inodes, 26214400 blocks 1310720 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=2174746624 800 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872 Allocating group tables: done Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done
三、挂载
sudo mount /dev/vdb /opt
将云盘挂载到/opt目录下。
四、配置开机自动挂载
修改/etc/fstab文件,文件末尾添加
/dev/vdb /opt ext4 defaults 0 0
五、重启检查
使用
init 6
优雅的重启系统。
使用
sudo df -h Filesystem Size Used Avail Use% Mounted on /dev/vda1 40G 3.6G 34G 10% / devtmpfs 1.9G 0 1.9G 0% /dev tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs 1.9G 8.4M 1.9G 1% /run tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup /dev/vdb 99G 61M 94G 1% /opt tmpfs 380M 0 380M 0% /run/user/1000
可以看到系统已挂载了SSD云盘。
总结
以上就是阿里云CentOS 7挂载SSD云盘方法的全部内容,希望本文的内容对大家的学习或者工作能带来一定的帮助,如果有疑问大家可以留言交流。